Faderfox PC4
Control the Input Channels with the Faderfox PC4
Categories:
The Faderfox PC4 is set up to be automatically connected to the correct output when PMX-1 is running. PMX-1 recognizes the default configuration of the Faderfox PC4. The control numbers are mapped as shown in the table below, and each Midi channel is mapped to the corresponding layer, depending on the layer selector, either on the Behringer CMD-1, or on the Open Stage Control GUI.
| Faderfox PC4 - CC Number and Parameter Mapping | ||||
|---|---|---|---|---|
| 1 | CC #1 | CC #2 | CC #3 | CC #4 |
| Saturator level in | Saturator drive | Saturator blend | Saturator level out | |
| 2 | CC #5 | CC #6 | CC #7 | CC #8 |
| Compressor threshold | Compressor ratio | Compressor attack | Compressor release | |
| 3 | CC #9 | CC #10 | CC #11 | CC #12 |
| Compressor makeup | Compressor knee | Compressor mix | ||
| 4 | CC #13 | CC #14 | CC #15 | CC #16 |
| Equalizer low | Equalizer mid | Equalizer high | Equalizer master | |
| 5 | CC #17 | CC #18 | CC #19 | CC #20 |
| Equalizer low/mid | Equalizer mid/high | |||
| 6 | CC #21 | CC #22 | CC #23 | CC #24 |